Warehouse Sale

Clare Sliding Barn Door Single Vanity

Was NZ$1,799.00

Now NZ$1,439.00

Availability: Check Availability

Care & Details

Bring a natural touch to your bathroom with the Clare bathroom vanity. Crafted from recycled pine, the rustic finish makes a beautiful contrast against the luxurious marble countertop. Offering three drawers and a sliding barn door with matte-black exposed iron hardware, there’s plenty of room for your towels, creams and cosmetics to be neatly tucked away in this spacious single vanity unit.

  • Made from eco-friendly recycled pine
  • NC finish on the wood to waterproof
  • Barn door with powder-coated iron hardware
  • Locally sourced GRC marble
  • Also available: matching Clare vanity mirror

Dimensions: 880mm x 1200mm x 490mm

Tapware & Waste sold separately

Check Availability

Technical Details:

  • Solid Recycled Pine construction with a Nitrocellulose finish
  • Solid GRC top (Glassfibre Reinforced Concrete) with a polyurethane finish
  • Barn style roller track constructed from Iron, which has been galvanised and then powdercoated
  • Undermount drawer runners
  • Dovetail Joinery on drawers
  • Undermount porcelain basin

Country of Origin: Indonesia

DimensionsVanity - H 880 x W 1200 x D 490 mm

Care Instructions:


  • Wipe clean with a damp cloth and dry with a clean cloth. Clean the timber surface by rubbing in the direction of the grain.
  • Clean up excess water and spills immediately by using a blotting action rather than a wiping action.
  • If water is left on the surface for a long period of time, it will cause white spots in the finish.
  • Occasional application of a natural-based furniture polish is recommended.
  • Do not use silicone-based products or other abrasive cleaners.
  • Because of the natural movement of the timber, it must be expected that the wood will slightly change shape due to variations in humidity and temperature, depending on the conditions of your home.
  • Therefore, care should be taken to avoid extreme heat conditions, moisture, and light, as this can cause the wood to swell, shrink or start to show signs of cracking.
  • We recommend the use of the Guardsman Wood Care kits, to help maintain the beautiful appearance of the timber for longer


  • GRC is porous, and stains easily, so wipe off any spills immediately.
  • Clean the surface regularly with fresh warm water and a non-abrasive clean cloth. A non-abrasive, neutral (pH-balanced) cleaner will help remove dirt and grime, but is recommended that you first try warm water only, then use a cleaner only if necessary.
  • The GRC top has been sealed as part of the manufacturing process, but we recommend customers seal the top upon installation for added protection against stains and then again every year with a good quality stone/concrete sealer. Follow the instructions on the sealer container for application and frequency of use.
  • The sealing process acts as a stain inhibitor and prevents most stains and soil from being absorbed into the porous surface, but it is not a guarantee against staining.
  • All spills should be cleaned immediately.
  • To protect the surface, avoid contact with all oils and petroleum-based products. Also avoid contact with all acid or caustic products, such as vinegar, citrus or fruit juices, soda, chlorine, and nail polish remover.
  • If the GRC is well-sealed, the warm water and non-abrasive cloth should keep it clean.
  • Placing protective pads on the bottom of any heavy objects will help prevent scratching of the GRC surface.
  • Periodically rotate accessories on the top so that they don’t sit in the same spot for an extended period of time

Porcelain Sink

  • Clean your porcelain sink regularly with non-abrasive cleansers and non-scratching sponges.
  • Avoid using abrasive cleaners.
  • Wash the sink with warm water, mild detergent, and a damp cloth or soft sponge.
  • Rinse thoroughly using clean warm water


  • Installation of plumbing products must be carried out by qualified tradespeople.
  • Any damage to our product caused by misuse, incorrect installation or installation by unqualified personnel is not covered by our warranty.
  • ESR cannot be held responsible for damage caused incorrect installation