Warehouse Sale

Kason Basin Mixer Brushed Brass


Availability: Check Availability

Care & Details

Transform your bathroom into a blissful space to relax and refresh with the latest bathroom accessories to suit every style and budget. From matt-black and brass tapware and towel rails to glass shelves and toilet roll holders, you’ll discover everything you need to infuse some contemporary elegance into your wet rooms.

Dimensions: Width 115 x Height 140mm

Check Availability

Technical Details:

  • Solid Brass Construction
  • PVD (brushed brass) finish
  • PVD is a process where the finished is reinforced with a Titanium coating for enhanced durability.
  • Wels Rating:  5 star rated – 5.5L/min
  • Nominal Flow Rate: 5.06L/min
  • Nominal Working Pressure:  150kPa - 500kPa

Country of Origin:  Taiwan

Care Instructions: 

  • Our Brushed Brass Kason fittings are prepared with a PVD process, coating the surface of each item with titanium for enhanced durability.
  • This titanium finish provides tapware and accessories with a stronger surface that is easy to maintain, won’t fade, tarnish or scratch, and will keep your bathroom fresh for years to come. All PVD fittings come with a 10-year warranty on the finish.
  • Do not, at any time, use abrasive, powder/liquid cream or corrosive chemical cleaners, or methylated spirits on any Bathroom tapware or accessories.
  • Always use a moist, soft cloth to remove soapy residue.
  • Regular wiping will prevent a build-up of soap residue and grime.
  • To maintain a longer lasting lustre, rinse off your tap set with clear water and wipe dry with a soft cloth after each wash.
  • Installation of plumbing products must be carried out by qualified tradespeople.
  • Any damage to our product caused by misuse, incorrect installation or installation by unqualified personnel is not covered by our warranty.
  • Our Kason tapware works best between 150kPa – 500kPa of operating pressure
  • Any installation with line pressures above 500kps, plumber must install a pressure limiting valve to the isolating stop valves
  • ESR cannot be held responsible for damage caused by high pressure systems.
  • For detailed instructions on how to install our Kason basin mixers, please refer to the Kason Installation Instructions, which are supplied with the product


  • ESR warrants the mechanical function of this product, if properly installed, to the original purchaser for the period of 1 year from the date of purchase.
  • For PVD items, ESR warrants the original purchaser, from the date of purchase of this product, against defects in all Physical Vapour Deposition (PVD) coating for a period of 10 years
  • This warranty covers faults in the product construction, material and assembly where the failure is due to a fault in the manufacture of the product.
  • Faulty products will be repaired or replaced free for the first 12 months from the date of purchase, if the product is found to be faulty
  • This guarantee only applies provided the goods are used in accordance with manufacturer’s instructions and are not damaged by accident, intentional damage, neglect, institutional/commercial use or exposure to environmental extremes
  • This warranty does not include faults caused by:
  1. Chemical, electrochemical or electrical influences
  2. Normal wear and tear
  3. Harsh detergents or abrasive cleaners used on product finishes
  4. Inadequate or complete lack of maintenance
  5. If installation or part installation is not carried out by a LICENSED PLUMBER
  6. Unsuitable or improper use of this product
  7. Incorrect installation