Warehouse Sale

Larsen Double Vanity With Marble Top

NZ$2,699.00

Availability: Check Availability

 
Description
Care & Details

Beautifully crafted from a solid mindi wood base with a plywood veneer, the classic shape and narrow diagonal legs of the Larsen double vanity showcase the timeless elegance of 1950s-style design. Two round freestanding basins, two cupboards and two drawers offer ample room for daily use and bathroom storage, while the jet-grey marble top has been locally sourced, sealed and waterproofed.

  • Glamorous double bathroom vanity
  •  
  • Timeless mid-century design with contemporary sophistication
  •  
  • Base crafted from mindi wood (white cedar)
  •  
  • Jet-grey marble top
  •  
  • 2 Freestanding basins, 2 drawers and 2 cupboards with shelves
  •  
  • Fully sealed and waterproofed

Dimensions: 800mm x 1400mm x 470mm

Tapware & Waste sold separately 

Check Availability

Technical Details:

  • Solid Mindi and Plywood base
  • Solid Marble top
  • Dovetail Joinery in Drawers
  • Undermount soft close Drawers
  • Soft Close doors with concealed hinge
  • Complete with Porcelain counter top basins

Country of Origin: Indonesia

Dimensions:  Vanity - H 800 x W 1400 x D 470 mm / Basin - H 120 x Diameter 360mm

Care Instructions:

Timber

  • Wipe clean with a damp cloth and dry with a clean cloth. Clean the timber surface by rubbing in the direction of the grain.
  • Clean up excess water and spills immediately by using a blotting action rather than a wiping action.
  • If water is left on the surface for a long period of time, it will cause white spots in the finish.
  • Occasional application of a natural-based furniture polish is recommended.
  • Do not use silicone-based products or other abrasive cleaners.
  • Because of the natural movement of the timber, it must be expected that the wood will slightly change shape due to variations in humidity and temperature, depending on the conditions of your home.
  • Therefore, care should be taken to avoid extreme heat conditions, moisture, and light, as this can cause the wood to swell, shrink or start to show signs of cracking.
  • We recommend the use of the Guardsman Wood Care kits, to help maintain the beautiful appearance of the timber for longer

Marble

  • Marble is porous, and stains easily, so wipe off any spills immediately.
  • Clean the surface regularly with fresh warm water and a non-abrasive clean cloth. A non-abrasive, neutral (pH-balanced) cleaner will help remove dirt and grime, but is recommended that you first try warm water only, then use a cleaner only if necessary.
  • The Marble top has not been sealed as part of the manufacturing process, so we recommend customers seal the top upon installation, and then again every year with a good quality marble sealer. Follow the instructions on the sealer container for application and frequency of use.
  • The sealing process acts as a stain inhibitor and prevents most stains and soil from being absorbed into the porous surface, but it is not a guarantee against staining.
  • All spills should be cleaned immediately.
  • To protect the surface, avoid contact with all oils and petroleum-based products. Also avoid contact with all acid or caustic products, such as vinegar, citrus or fruit juices, soda, chlorine, and nail polish remover.
  • If the marble is well-sealed, the warm water and non-abrasive cloth should keep it clean.
  • Placing protective pads on the bottom of any heavy objects will help prevent scratching of the marble surface.
  • Periodically rotate accessories on marble so that they don’t sit in the same spot for an extended period of time

Porcelain Sink

  • Clean your porcelain sink regularly with non-abrasive cleansers and non-scratching sponges.
  • Avoid using abrasive cleaners.
  • Wash the sink with warm water, mild detergent, and a damp cloth or soft sponge.
  • Rinse thoroughly using clean warm water

Installation

  • Installation of plumbing products must be carried out by qualified tradespeople.
  • Any damage to our product caused by misuse, incorrect installation or installation by unqualified personnel is not covered by our warranty.
  • ESR cannot be held responsible for damage caused incorrect installation