Warehouse Sale

Marson Table 2400mm


Availability: Check Availability

Care & Details

Give your alfresco area a modern makeover with the stylish Marson, a faux-cement dining table with a decidedly urban aesthetic. Composed of a light-weight polyresin, this sleek piece can be mixed and matched with your choice of chairs or benches.

Dimensions: Height 780 x Width 2400 x Depth 1000mm



Technical Details:

  • The tables’ legs and frame is crafted with Acacia hardwood.
  • Acacia contains a high natural oil content that preserves the timber, making it perfect for outdoor use.
  • Each tables’ top is crafted from light-weight polyresin.
  • Colour is applied to the resin prior to pouring.

DimensionsHeight 780 x Width 2400 x Depth 1000mm

Care Instructions:

  • It is recommended that you tighten the screws on tables and benches periodically.
  • To give extra protection against hot cups, plates etc and accidental spillages, it is always best to protect the beauty of your table with place mats. 
  • All outdoor furniture products will keep their new appearance longer if they are protected from the elements when not in use.  Avoid leaving in direct weather for extended periods of time.

Timber General

  • For everyday cleaning, wipe over with a damp cloth.
  • Use a stiff brush to remove any dirt or debris 
  • Do not use a silicone-based products on timber furniture, as it will cause a build-up of silicone on the product, which can discolour and dry out the timber 
  • We also recommend the use of Guardsman Outdoor Wood Protector which repels stains and protects against mildew. 
Acacia with Polyurethane finish
  • Exterior PU finishes require moderate levels of maintenance (as a guide, every 12 18 months, but can vary depending on your climate, outdoor
  • conditions and if it is left continuously in direct weather).
  • These are available from all major hardware stores and always follow the application process on the product.
  • Exterior PU finishes are applied with a natural bristle brush in multiple coats.
  • Sand the hardened varnish lightly between each coat.
  • As soon as you see a chalky film start to develop on your product, it’s time to freshen the finish.
  • Simply sand the topcoat smooth, and apply a new coat of the exterior polyurethane.
  • Don’t put this important maintenance step off too long or cracks will develop in the finish allowing moisture to penetrate and degrade the wood.

Polyresin Care

  • For everyday cleaning simply wash down regularly with mild soap and warm water.
  • Do not use abrasive materials or cleaners as this will damage the surface
  • Avoid placing/leaving pot plants on the table top, as fertilisers in some potting mixes can react with the table top if the pot overflows after watering leaving patches of discolouration.  If this happens, any overflow should be wiped up ASAP